YUGOSLAVIAN 3 & 4 PC. SETS

  1. M70 M90 M64 M72 RPK

  2. M70/Tabuk Sniper

  3. M76 Sniper

MILLED RECEIVER STOCK SETS

  1. Bulgarian 1 & 2 Tang

  2. Chinese MAK 1 Tang

  3. Chinese 2 Tang Poly-tech

  4. Czechoslovakian VZ58

  5. Polish Model 1960

PISTOL GRIP HAND GUARD SETS

  1. All 3 pc. Sets

HAND GUARD SETS

  1. All 2 pc. Sets

INDIVIDUAL PARTS

  1. Butt Stocks & Pistol Grips

  2. Upper & Lower Hand Guards

AR-15 STOCK SETS

  1. A1 FULL, MID & CAR

  2. A2 FULL, MID & CAR

AR-15 INDIVIDUAL STOCK PARTS

  1. All AR-15 Individual Parts

CUSTOM STOCK PRODUCTS

  1. STG-47

Product Categories

MAK90/T56 stock sets

Sets listed on this page fit Chinese straight cut stamped receiver AK-47s.

Including the following models:

  1. MAK90, Polytech, & NHM models

  2. If you have a post ban sporter thumbhole MAK model, you should remove

  the thumbhole stock to verify if your receiver is straight cut.


Scroll down to see optional AKM style stock set for MAK 90

For more info on receiver types, go to:

Receiver ID page

The Ironwood Designs T56 set is faithful to the original Chinese

design stock set. Butt stock: correct length, at 9 1/4”, as arrow

indicates, and has correct location bottom swivel cut. It is cut to

accept an original AK military trapdoor butt plate.


Pistol grip: correct T56 pattern, with checkering. Some T56

original grips did not have checkering. Please specify, when you

order, if you do not want checkering


(We no longer supply the grip caps), mtg. screw bushing are still

included, as shown. Must be used with grip screw measuring 4 1/8”

overall length.


Upper hand guard: correct T56 pattern, with no vent slots.

Lower hand guard: correct T56 pattern, accepts original rear

ferrule cap. We do not sell or provide lower rear ferrule cap.

Cleaning rod hole is only drilled upon request. (no charge).


The set is sold as shown. The 3 options available are, recoil

pad, bayonet slot, and Chicom finish. Part #s and prices for

these options posted below.


Unfinished sets, sanded to 150 grit.

PART #T56-SET   PRICE $175 + $13 SHIPPING

RECOIL PAD OPTION, add Part# RP  Price $20

SPIKER BAYONET CUT OPTION, add Part# BAYO-CUT  Price $10

CHICOM ORANGE FINISH OPTION, add part # Chicom-Orange Price $50

To view optional cut-to-order wood types, GO TO WOOD TYPES PAGE

9-1/4”

Examples shown in recommended hardwood Birch

FINISHING TIP: If you want to achieve the orange like finish found on many Chinese AKs, like the finish shown on the top of this page,

a 4 coat application of an off the shelf Amber Shellac, applied to a hardwood Birch set, will do the job.

If you want us the finish it, use the part # listed above. Allow an extra 2-3 weeks for delivery.

Spiker bayonet cut example. If slot cut is ordered, along with

cleaning rod hole, slot will cut into rod hole, like the originals

PART # 100-AKM PRICE $155 + $13 SHIPPING

RECOIL PAD OPTION, add Part# RP  Price $20

EXTENDED LENGTH PLATE CUT, add Part# EXT-BP (no charge)

CAP CUT STD. AKM PISTOL GRIP, add Part# CC-PG (no charge)

To view available wood types, GO TO WOOD TYPES PAGE

9-3/4”

Examples shown in Birch Laminate

Optional AKM type stock set for MAK 90.

For those who want the look and feel of the Soviet AK

For any desired optional cuts, or part upgrades that are not listed with the std. set offering on this page, or to clarify any options

that are listed on this page. please go to our new CUSTOM CUT-TO-ORDER page

The Ironwood Designs AKM set is faithful to the original

Soviet stock set, but is cut to fit Chinese AKs.

Butt stock: extended length, at 9 3/4”, as arrow indicates, and

has correct location side swivel cut. It is cut to accept an original

AK military trapdoor butt plate. We do not sell or provide butt

plates.


Pistol grip: correct AKM pattern. Grip screw counterbore is drilled

deeper to fit shorter mtg. screws found on thumbhole sporter MAK 90 stocks. If using a std. grip screw, (4-1/8” oal). please specify.



Upper hand guard: correct AKM pattern, with vent slots.

Lower hand guard: correct AKM bulged pattern.

Cleaning rod hole is only drilled upon request. (no charge).





All sets sold unfinished, clean sanded to 150 grit.

READ ME: Important pistol grip information. Because we can no

longer find any grip caps in bulk, or even in small quantities, we have

modified the fat pistol grip to a non-cap cut configuration. If you have a

grip cap already, you must indicate this when ordering the T56 set.

Otherwise we will automatically send you our new non-cap cut FPG. Shape is identical to cap cut version, except with no cap cut.

Cap cut

Non-Cap cut