YUGOSLAVIAN 3 & 4 PC. SETS

  1. M70 M90 M64 M72 RPK

  2. M70/Tabuk Sniper

  3. M76 Sniper

MILLED RECEIVER STOCK SETS

  1. Bulgarian 1 & 2 Tang

  2. Chinese MAK 1 Tang

  3. Chinese 2 Tang Poly-tech

  4. Czechoslovakian VZ58

  5. Polish Model 1960

PISTOL GRIP HAND GUARD SETS

  1. All 3 pc. Sets

HAND GUARD SETS

  1. All 2 pc. Sets

INDIVIDUAL PARTS

  1. Butt Stocks & Pistol Grips

  2. Upper & Lower Hand Guards

AR-15 STOCK SETS

  1. A1 FULL, MID & CAR

  2. A2 FULL, MID & CAR

AR-15 INDIVIDUAL STOCK PARTS

  1. All AR-15 Individual Parts

CUSTOM STOCK PRODUCTS

  1. STG-47

Product Categories

For more info on receiver types, go to:

Receiver ID page

Sets listed on this page fit Bulgarian Milled 1 & 2 tang receivers.

Including Arsenal SAM-7 models, and SLR-95 post ban AKs.

Will also fit Chinese, US made, and other traditional 2 tang milled

AK receivers.


Bulgarian 1 tang receivers were originally the traditional 2 tang type.

The lower tang was removed to fit the post-ban thumb-hole sporter

stocks.

Bulgarian milled stock sets

1 Tang model

2 Tang model

To view available wood types, GO TO WOOD TYPES PAGE

Examples shown in random wood types

PART # 310 (1 tang set)   PRICE $165 + $13 SHIPPING

Single tang receiver lower hand guards automatically come without the rear ferrule cap cut found on original Bulgarian wood lower hand guards.

Most single tang Bulgarians came with a plastic lower hand guard, which does not have the original rear cap.

PART # 320 (2 tang set)   PRICE $155 + $13 SHIPPING

If you have an original Bulgarian wood lower hand guard, with the rear ferrule cap, make sure to add the note: LHG-T3-CC

If you do not have the original wood lower, and have a plastic lower, order the lower as LHG-T3-NC, for no cap cut.


RECOIL PAD OPTION, add Part# RP  Price $20

EXTENDED BUTT PLATE CUT add Part# EXT-BP No Charge (these options apply to both 1 & 2 tang sets)

Sets sold unfinished, clean sanded to 150 grit.

Available wood types for this set include, Birch Laminate (LAM), Beech (BE), Hardwood Birch (BI), Maple (MA), and Walnut (W).

Walnut sets are always cut to order, to ensure they come from the same blank. The other listed hardwoods vary in pre-cut supply, and can also be cut to order.

BASE MODEL 4 piece stock set comes with a correct Bulgarian

pattern butt stock. Both 1 & 2 tang butt is cut to accept an original

AK steel butt plate, and a military sling swivel, (side mounted).

Due to special mounting bolt, 1 tang model is not cut for cleaning

kit pocket.

Special mtg. bolt &lug, (included with set), shown below. Bolt &

lug only required for single tang Bulgarian receiver. Butt plate

information posted below as well.


NO OTHER HARDWARE IS INCLUDED OR AVAILABLE

FROM IWD


Base model 4 piece stock set comes with a Russian AKM

pattern pistol grip, and std. AK upper hand guard.

Base model 4 piece set comes with Bulgarian correct pattern,

flat sided lower hand guard. Cut to accept original lower hand

guard rear ferrule cap. Cleaning rod hole drilled on request only.


9-3/4”

CUSTOM CUT TO ORDER SETS

New Custom Order page coming soon

Hardware information

All Bulgarian pattern AKM stocks are cut to fit

original AK sling swivels as shown above.

Swivel cuts are done on left side.

All std. AK upper hand guards are

cut to accept original upper spring

tensioners, as shown above.

For complete details about hardware, GO TO HARDWARE PAGE

4”

All pistol grips shown on this page

should use a std. AK pistol grip mtg.

screw. Measures 4” below the head.

When you are ready to order, GO TO OUR ORDER PAGE

for simple order instructions.

Single tang set shown. Special mounting

hardware shown to the right of the lower

hand guard. Hardware only required for

single tang model.

All Bulgarian milled butt stocks are cut and fitted for standard butt plates. Plates without trapdoor holes are

recommended for the single tang models as they will cover the hole for the special mtg. bolt. Trap door plates can be

used, but the trapdoor will not open. A slot can be cut in the rear of the butt to allow installation of the trapdoor plate.

Butt stocks can be ordered to fit Bulgarian (far left), East German (middle), or std. trap door plate

(right). Please make sure specify the plate you are going to use, at time of order.

©2012 Ironwood Designs, matt@Ironwooddesigns.com

All IWD products proudly made in USA.